Hastelloy Fender Washers for Corrosive Environments
Product and Material Overview
Hastelloy Fender Washer products spread fastening loads across a broad surface while resisting pitting, crevice corrosion and aggressive chemical media. In addition, their large outside diameter is especially useful with thin sheet, panels and softer assembly materials.
In addition, buyers can specify the inside diameter, outside diameter, thickness, Hastelloy grade, finish and dimensional tolerances. Therefore, each washer can be matched to the fastener, joint load, temperature and chemical environment.
Hastelloy Grades & Fender Washer Configurations
Material options vary according to engineering and environmental requirements. Moreover, selection should consider the application, service conditions and the applicable technical specification.
Common Hastelloy Fender Washer Options
Hastelloy C-276
For example, Hastelloy C-276 offers broad chemical resistance in many oxidizing and reducing environments.
Hastelloy C-22
By comparison, Hastelloy C-22 provides another high-performance option where oxidizing media and localized corrosion are concerns.
Large Outside Diameter
As a result, a wide outside diameter distributes clamp force over a larger area and helps protect thin or soft assembly surfaces.
Standard & Custom IDs
In addition, standard and custom inside diameters can be supplied to suit metric or inch fasteners and specified clearances.
Custom Thicknesses
Meanwhile, custom thicknesses help meet load-distribution, stiffness and assembly stack-up requirements.
Custom & Special Grades
Finally, buyers can request special inside diameters, outside diameters, thicknesses, grades, finishes and packaging.
Hastelloy Fender Washer Specifications
Dimensions, materials, grades and applicable standards can be selected according to the project drawing or purchase specification. Therefore, the final configuration should match the required service conditions.
For official Hastelloy C-276 composition, product forms and corrosion information, refer to the Haynes International C-276 alloy guide.
Key Specification Parameters
| Parameter | Available Options |
|---|---|
| Product Type | Large outside-diameter flat washers for load distribution |
| Material Grades | Hastelloy C-276, C-22, B-series and specified nickel-based alloys |
| Dimensions | Standard and custom inside diameter, outside diameter and thickness |
| Standards | DIN, ISO, ASME or custom drawing requirements, as applicable |
| Tolerances | Specified ID, OD, thickness and flatness tolerances |
| Edges | Deburred, chamfered or drawing-defined edge details |
| Surface Condition | Cleaned, solution-treated condition as supplied, or project-specified finish |
| Supply | Individual pieces, bulk quantities, kits or project-specific packaging |
| Inspection | Material verification, dimensions, flatness, surface condition and documentation |
Hastelloy Fender Washer Applications
In particular, engineers specify these large-OD washers for chemical plants, pollution-control equipment, marine systems, oil and gas facilities and heat exchangers. For example, suitable grades distribute clamp loads in panels, supports, vessels and corrosive process equipment.
Typical Use Areas
Hastelloy Fender Washer Manufacturing
Generally, the production route depends on the Hastelloy grade, inside diameter, outside diameter, thickness and edge details. In practice, manufacturing includes material verification, blanking or machining, deburring, cleaning, finishing and inspection. In addition, teams control each stage against the drawing or purchase requirement.
Typical Production Stages
Raw Material Verification
First, the production team verifies the specified Hastelloy grade, sheet or plate dimensions, heat number and incoming material condition. Consequently, this check supports material traceability before production begins.
Forming & Machining
Next, controlled blanking or machining produces the required inside diameter, outside diameter and thickness. As a result, each washer receives the specified basic geometry.
Deburring & Finishing
Afterward, edges are deburred and surfaces are cleaned, passivated or finished as required by the specification. Moreover, these operations prepare the parts for final inspection.
Inspection
Finally, inspection verifies inside diameter, outside diameter, thickness, flatness, material identity, surface condition and documentation. Therefore, the finished order can be checked against the purchase specification.
Quality & Inspection
Fender Washer Inspection Areas
Consistent Product Requirements
Related Fender Washers
Product FAQs
What is a Hastelloy fender washer?
A Hastelloy fender washer is a flat washer with a large outside diameter relative to its opening. Consequently, its specified nickel-based alloy spreads fastening loads and resists corrosive environments.
Which grades are available?
For example, common options include C-276, C-22 and other specified Hastelloy grades. However, availability depends on inside diameter, outside diameter, thickness, grade and quantity.
Can these washers be customized?
In addition, buyers can discuss custom inside diameters, outside diameters, thicknesses, edge details, grades and packaging according to the specification. Moreover, final requirements should be confirmed before production.
Where are fender washers used?
Typically, engineers specify these washers for chemical plants, marine systems, oil and gas equipment, heat exchangers and pollution-control systems. For example, the selected grade should match the media, temperature and load.
How do I select the correct washer?
Above all, selection should consider Hastelloy grade, inside diameter, outside diameter, thickness, load, temperature, chemicals and mating components. Therefore, buyers should review project calculations and material requirements before ordering.
Looking for Hastelloy Fender Washers?
Finally, share the required Hastelloy grade, inside diameter, outside diameter, thickness, quantity and project specification with our team.