Select Language
Loading languages...
Corrosion-Resistant Large-OD Washers

Hastelloy Fender Washers Manufacturer & Supplier

Hastelloy Fender Washer products distribute fastening loads across a wide surface while resisting chemical, marine and other aggressive industrial environments.

Hastelloy Fender Washers
Product
Fender Washer
Material
Hastelloy C-276, C-22 & Custom
Options
Inside Diameter, Outside Diameter & Thickness
Enquiry
Custom Requirements Accepted

Hastelloy Fender Washers for Corrosive Environments

Product and Material Overview

Hastelloy Fender Washer products spread fastening loads across a broad surface while resisting pitting, crevice corrosion and aggressive chemical media. In addition, their large outside diameter is especially useful with thin sheet, panels and softer assembly materials.

In addition, buyers can specify the inside diameter, outside diameter, thickness, Hastelloy grade, finish and dimensional tolerances. Therefore, each washer can be matched to the fastener, joint load, temperature and chemical environment.

Hastelloy Grades & Fender Washer Configurations

Material options vary according to engineering and environmental requirements. Moreover, selection should consider the application, service conditions and the applicable technical specification.

Common Hastelloy Fender Washer Options

01

Hastelloy C-276

For example, Hastelloy C-276 offers broad chemical resistance in many oxidizing and reducing environments.

02

Hastelloy C-22

By comparison, Hastelloy C-22 provides another high-performance option where oxidizing media and localized corrosion are concerns.

03

Large Outside Diameter

As a result, a wide outside diameter distributes clamp force over a larger area and helps protect thin or soft assembly surfaces.

04

Standard & Custom IDs

In addition, standard and custom inside diameters can be supplied to suit metric or inch fasteners and specified clearances.

05

Custom Thicknesses

Meanwhile, custom thicknesses help meet load-distribution, stiffness and assembly stack-up requirements.

06

Custom & Special Grades

Finally, buyers can request special inside diameters, outside diameters, thicknesses, grades, finishes and packaging.

Hastelloy Fender Washer Specifications

Dimensions, materials, grades and applicable standards can be selected according to the project drawing or purchase specification. Therefore, the final configuration should match the required service conditions.

For official Hastelloy C-276 composition, product forms and corrosion information, refer to the Haynes International C-276 alloy guide.

Key Specification Parameters

Parameter Available Options
Product TypeLarge outside-diameter flat washers for load distribution
Material GradesHastelloy C-276, C-22, B-series and specified nickel-based alloys
DimensionsStandard and custom inside diameter, outside diameter and thickness
StandardsDIN, ISO, ASME or custom drawing requirements, as applicable
TolerancesSpecified ID, OD, thickness and flatness tolerances
EdgesDeburred, chamfered or drawing-defined edge details
Surface ConditionCleaned, solution-treated condition as supplied, or project-specified finish
SupplyIndividual pieces, bulk quantities, kits or project-specific packaging
InspectionMaterial verification, dimensions, flatness, surface condition and documentation

Hastelloy Fender Washer Applications

In particular, engineers specify these large-OD washers for chemical plants, pollution-control equipment, marine systems, oil and gas facilities and heat exchangers. For example, suitable grades distribute clamp loads in panels, supports, vessels and corrosive process equipment.

Typical Use Areas

01 Chemical Processing Equipment
02 Pollution-Control Systems
03 Oil & Gas Equipment
04 Marine & Offshore Systems
05 Heat Exchangers
06 Thin Sheet & Panel Assemblies
07 Flange & Support Assemblies
08 Maintenance & Retrofit Work

Hastelloy Fender Washer Manufacturing

Generally, the production route depends on the Hastelloy grade, inside diameter, outside diameter, thickness and edge details. In practice, manufacturing includes material verification, blanking or machining, deburring, cleaning, finishing and inspection. In addition, teams control each stage against the drawing or purchase requirement.

Typical Production Stages

MATERIAL 01

Raw Material Verification

First, the production team verifies the specified Hastelloy grade, sheet or plate dimensions, heat number and incoming material condition. Consequently, this check supports material traceability before production begins.

FORMING 02

Forming & Machining

Next, controlled blanking or machining produces the required inside diameter, outside diameter and thickness. As a result, each washer receives the specified basic geometry.

FINISHING 03

Deburring & Finishing

Afterward, edges are deburred and surfaces are cleaned, passivated or finished as required by the specification. Moreover, these operations prepare the parts for final inspection.

QUALITY 04

Inspection

Finally, inspection verifies inside diameter, outside diameter, thickness, flatness, material identity, surface condition and documentation. Therefore, the finished order can be checked against the purchase specification.

Quality & Inspection

Fender Washer Inspection Areas

Inspection Focus

Consistent Product Requirements

ID & OD Verification
Thickness Inspection
Raw Material Verification
Flatness Inspection
Surface Finish Checking
Specification Review

Related Fender Washers

Product FAQs

What is a Hastelloy fender washer?

A Hastelloy fender washer is a flat washer with a large outside diameter relative to its opening. Consequently, its specified nickel-based alloy spreads fastening loads and resists corrosive environments.

Which grades are available?

For example, common options include C-276, C-22 and other specified Hastelloy grades. However, availability depends on inside diameter, outside diameter, thickness, grade and quantity.

Can these washers be customized?

In addition, buyers can discuss custom inside diameters, outside diameters, thicknesses, edge details, grades and packaging according to the specification. Moreover, final requirements should be confirmed before production.

Where are fender washers used?

Typically, engineers specify these washers for chemical plants, marine systems, oil and gas equipment, heat exchangers and pollution-control systems. For example, the selected grade should match the media, temperature and load.

How do I select the correct washer?

Above all, selection should consider Hastelloy grade, inside diameter, outside diameter, thickness, load, temperature, chemicals and mating components. Therefore, buyers should review project calculations and material requirements before ordering.

Looking for Hastelloy Fender Washers?

Finally, share the required Hastelloy grade, inside diameter, outside diameter, thickness, quantity and project specification with our team.

Send Your Requirement

Contact Us

ADDRESS
Ground Floor 12-B,
91/101 Khemraj Bhavan,
7th Khetwadi Lane,
Mumbai – 400004

Mstar Enterprises

Trusted Partner For Industrial Solutions & Engineering Supplies