Select Language
Loading languages...
Versatile Expansion Anchoring

Sleeve Anchor Manufacturer & Supplier

Sleeve Anchor products provide versatile expansion fixing for concrete, solid masonry and other approved base materials.

Sleeve Anchor
Product
Cable Management
Material
Carbon Steel Options, 316 & More
Options
Threads, Lengths & Tie Styles
Enquiry
Custom Requirements Accepted

Sleeve Anchor Products for Secure Fixing

Product Overview

Sleeve Anchor products use a threaded stud, expansion sleeve, cone and fixture-retaining head. Tightening the nut or screw draws the cone into the sleeve and expands it against the prepared hole.

In addition, buyers can select the anchor diameter, length, material, finish and head style. Therefore, each fixing should match the base material, fixture thickness, design load, edge distance and environment.

Sleeve Anchor Materials & Tie Styles

Material options vary according to engineering and environmental requirements. Moreover, selection should consider the application, service conditions and the applicable technical specification.

Common Sleeve Anchor Options

01

Carbon Steel Options

For indoor and protected construction, coated carbon steel provides dependable strength and economical performance.

02

Stainless Steel Options

Where moisture or corrosive exposure is expected, stainless steel options provide improved environmental resistance.

03

Hex Nut Sleeve Anchors

For through-fixing applications, hex nut styles provide controlled tightening and convenient fixture retention.

04

Hex Bolt Sleeve Anchors

In addition, hex bolt styles provide an integrated head for straightforward installation through the fixture.

05

Tang & Tangless Styles

Meanwhile, countersunk styles support applications that require a flush or low-profile finished surface.

06

Custom & Special Grades

Finally, buyers can request special diameters, lengths, head styles, stainless steel grades and packaging.

Sleeve Anchor Specifications

Dimensions, materials, grades and applicable standards can be selected according to the project drawing or purchase specification. Therefore, the final configuration should match the required service conditions.

For concrete-anchor assessment documents, refer to the EOTA EAD catalogue for post-installed mechanical fasteners.

Key Specification Parameters

Parameter Available Options
Product TypeSleeve expansion anchors
MaterialsCarbon steel, stainless steel 304, stainless steel 316 and specified grades
Head StylesHex nut, hex bolt, countersunk, hook and project-specific configurations
SizesMetric and specified diameters in standard or custom anchor lengths
InstallationThrough-fixing into a correctly drilled and cleaned hole using the specified tightening torque
Base MaterialsConcrete, solid masonry and other materials covered by the applicable requirements
Fixture RangeLengths selected according to fixture thickness and required embedment
SupplyComplete anchor assemblies and project-specific packs
InspectionMaterial, dimensions, thread fit, finish and sleeve geometry

Sleeve Anchor Applications

Installers use these anchors for brackets, frames, rails, supports, machinery and building-services fixtures. For example, suitable sizes serve concrete, solid masonry, industrial plants and maintenance projects.

Typical Use Areas

01 Engineering & Machinery
02 Construction & Fabrication
03 Industrial Equipment
04 Structural Applications
05 Automotive Applications
06 General Manufacturing
07 Process Equipment
08 Maintenance & Repair

Sleeve Anchor Manufacturing Process

Generally, the production route depends on the selected material, diameter, length, finish, head style and sleeve geometry. In practice, manufacturing includes material preparation, forming or machining, threading, sleeve production, surface treatment and inspection. In addition, teams control each stage against the drawing or purchase requirement.

Typical Production Stages

MATERIAL 01

Raw Material Verification

First, the production team verifies the specified carbon or stainless steel grade, section dimensions and incoming material condition.

FORMING 02

Forming & Machining

Next, controlled forming or machining creates the threaded stud, head, expansion cone and required body details.

LOCKING 03

Threading & Passivation

Afterward, the sleeve is formed and assembled with the stud, cone, nut or screw. Moreover, components receive the specified coating, cleaning or passivation.

QUALITY 04

Inspection

Finally, inspection verifies assembly dimensions, thread fit, sleeve geometry, material grade, surface condition and documentation.

Quality & Inspection

Inspection Areas

Inspection Focus

Consistent Product Requirements

Dimensional Verification
Thread Inspection
Raw Material Verification
Visual Inspection
Surface Finish Checking
Specification Review

Related Bundling Products

Sleeve Anchor FAQs

What is a sleeve anchor?

A sleeve anchor is a through-fixing expansion fastener with a sleeve around the anchor body. As a result, tightening the nut or screw expands the sleeve and secures the fixture to the base material.

Which sleeve anchor styles are available?

Common options include carbon steel, stainless steel, hex nut, hex bolt, countersunk, hook and custom-head designs. However, availability depends on the diameter, length, material and project requirements.

Can sleeve anchors be customized?

Buyers can discuss custom diameters, lengths, head styles, sleeve profiles, materials, finishes and packaging according to the specification. Moreover, final requirements should be confirmed before production.

Where are sleeve anchors used?

Installers commonly use these products for brackets, frames, rails, supports, machinery and building-service fixtures. For example, the selected size should match the base material and fixture thickness.

How do I select the right sleeve anchor?

Selection should consider material, finish, diameter, length, head style, base material, fixture thickness and load. Therefore, buyers should review structural calculations and installation instructions before ordering.

Looking for Sleeve Anchor Products?

Finally, share the required material, finish, diameter, length, head style, quantity and project specification with our team.

Send Your Requirement

Contact Us

ADDRESS
Ground Floor 12-B,
91/101 Khemraj Bhavan,
7th Khetwadi Lane,
Mumbai – 400004

Mstar Enterprises

Trusted Partner For Industrial Solutions & Engineering Supplies