Carbon Steel Wedge Anchor Products for Concrete Fixing
Product Overview
Carbon Steel Wedge Anchor products use a threaded carbon steel stud, expansion clip and tapered wedge section. Tightening the nut pulls the wedge through the clip, which expands against the wall of the prepared concrete hole.
In addition, buyers can select the anchor diameter, length, carbon steel grade, coating and thread configuration. Therefore, each fixing should match the concrete condition, fixture thickness, design load, edge distance and environment.
Carbon Steel Wedge Anchor Materials & Tie Styles
Material options vary according to engineering and environmental requirements. Moreover, selection should consider the application, service conditions and the applicable technical specification.
Common Carbon Steel Wedge Anchor Options
Zinc-Plated Carbon Steel
For indoor and protected construction, zinc-plated carbon steel provides dependable strength and economical corrosion protection.
Hot-Dip Galvanized Steel
Where greater coating thickness is required, hot-dip galvanized steel offers improved protection for suitable environments.
Fully Threaded Anchors
For flexible fixture thicknesses, fully threaded designs provide a broad adjustment range above the embedment zone.
Partially Threaded Anchors
In addition, partially threaded designs provide an unthreaded shank section for specified fixtures and embedment requirements.
Tang & Tangless Styles
Meanwhile, engineered expansion clips provide controlled engagement when the anchor is tightened to the specified torque.
Custom & Special Grades
Finally, buyers can request special diameters, lengths, thread lengths, stainless steel grades and packaging.
Carbon Steel Wedge Anchor Specifications
Dimensions, materials, grades and applicable standards can be selected according to the project drawing or purchase specification. Therefore, the final configuration should match the required service conditions.
For concrete-anchor assessment documents, refer to the EOTA EAD catalogue for post-installed mechanical fasteners.
Key Specification Parameters
| Parameter | Available Options |
|---|---|
| Product Type | Carbon steel torque-controlled wedge anchors |
| Materials | Specified carbon steel grades with zinc-plated, galvanized or project-defined finishes |
| Configurations | Fully threaded, partially threaded and project-specific designs |
| Sizes | Metric and specified diameters in standard or custom anchor lengths |
| Installation | Through-fixing into a correctly drilled and cleaned concrete hole using specified torque |
| Base Material | Concrete covered by the applicable design and product requirements |
| Fixture Range | Lengths selected according to fixture thickness and required embedment |
| Supply | Complete studs with expansion clips, nuts and washers |
| Inspection | Material grade, dimensions, thread fit, coating and clip geometry |
Carbon Steel Wedge Anchor Applications
Installers use these anchors for structural steel, machinery, columns, brackets, rails and equipment supports. For example, suitable sizes serve concrete foundations, industrial plants, infrastructure and maintenance projects.
Typical Use Areas
Carbon Steel Wedge Anchor Manufacturing Process
Generally, the production route depends on the carbon steel grade, diameter, length, coating, thread configuration and wedge geometry. In practice, manufacturing includes material preparation, heading or machining, threading, clip production, surface treatment and inspection. In addition, teams control each stage against the drawing or purchase requirement.
Typical Production Stages
Raw Material Verification
First, the production team verifies the specified carbon steel grade, bar dimensions and incoming material condition.
Forming & Machining
Next, controlled heading or machining creates the stud end, tapered wedge section and required body details.
Threading & Passivation
Afterward, threads and the expansion clip are completed and assembled with the nut and washer. Moreover, components receive the specified zinc plating, galvanizing or protective finish.
Inspection
Finally, inspection verifies stud dimensions, thread fit, clip geometry, material grade, surface condition and documentation.
Quality & Inspection
Inspection Areas
Consistent Product Requirements
Related Bundling Products
Carbon Steel Wedge Anchor FAQs
What is a carbon steel wedge anchor?
A carbon steel wedge anchor is a coated, torque-controlled expansion fastener for approved concrete applications. As a result, tightening the nut draws the tapered section through the clip and secures the fixture.
Which carbon steel wedge anchor styles are available?
Common options include fully threaded, partially threaded and custom-length designs with different protective finishes. However, availability depends on the diameter, length, coating and project requirements.
Can carbon steel wedge anchors be customized?
Buyers can discuss custom diameters, lengths, thread lengths, clip profiles, steel grades, coatings and packaging according to the specification. Moreover, final requirements should be confirmed before production.
Where are carbon steel wedge anchors used?
Installers commonly use these products for structural steel, machinery, columns, brackets, rails and equipment supports. For example, the selected size should match the concrete condition and fixture thickness.
How do I select the right carbon steel wedge anchor?
Selection should consider carbon steel grade, coating, diameter, length, thread configuration, concrete condition, fixture thickness and load. Therefore, buyers should review structural calculations and installation instructions before ordering.
Looking for Carbon Steel Wedge Anchors?
Finally, share the required steel grade, coating, diameter, length, thread configuration, quantity and project specification with our team.