Select Language
Loading languages...
Versatile Expansion Anchoring

Stainless Steel Sleeve Anchor Manufacturer & Supplier

Stainless Steel Sleeve Anchor products provide corrosion-resistant expansion fixing for concrete, solid masonry and other approved base materials.

Stainless Steel Sleeve Anchor
Product
Cable Management
Material
Stainless Steel 304, 316 & More
Options
Threads, Lengths & Tie Styles
Enquiry
Custom Requirements Accepted

Stainless Steel Sleeve Anchor Products for Secure Fixing

Product Overview

Stainless Steel Sleeve Anchor products use a threaded stud, expansion sleeve, cone and fixture-retaining head. Tightening the nut or screw draws the cone into the sleeve and expands it against the prepared hole.

In addition, buyers can select the anchor diameter, length, stainless steel grade and head style. Therefore, each fixing should match the base material, fixture thickness, design load, edge distance and environment.

Stainless Steel Sleeve Anchor Materials & Tie Styles

Material options vary according to engineering and environmental requirements. Moreover, selection should consider the application, service conditions and the applicable technical specification.

Common Stainless Steel Sleeve Anchor Options

01

Stainless Steel 304

For general construction, stainless steel 304 provides dependable corrosion resistance and mechanical performance.

02

Stainless Steel 316

Where marine or chemical exposure is expected, stainless steel 316 offers improved corrosion resistance.

03

Hex Nut Sleeve Anchors

For through-fixing applications, hex nut styles provide controlled tightening and convenient fixture retention.

04

Hex Bolt Sleeve Anchors

In addition, hex bolt styles provide an integrated head for straightforward installation through the fixture.

05

Tang & Tangless Styles

Meanwhile, countersunk styles support applications that require a flush or low-profile finished surface.

06

Custom & Special Grades

Finally, buyers can request special diameters, lengths, head styles, stainless steel grades and packaging.

Stainless Steel Sleeve Anchor Specifications

Dimensions, materials, grades and applicable standards can be selected according to the project drawing or purchase specification. Therefore, the final configuration should match the required service conditions.

For concrete-anchor assessment documents, refer to the EOTA EAD catalogue for post-installed mechanical fasteners.

Key Specification Parameters

Parameter Available Options
Product TypeStainless steel sleeve expansion anchors
Steel GradesStainless steel 304, stainless steel 316 and specified corrosion-resistant grades
Head StylesHex nut, hex bolt, countersunk, hook and project-specific configurations
SizesMetric and specified diameters in standard or custom anchor lengths
InstallationThrough-fixing into a correctly drilled and cleaned hole using the specified tightening torque
Base MaterialsConcrete, solid masonry and other materials covered by the applicable requirements
Fixture RangeLengths selected according to fixture thickness and required embedment
SupplyComplete anchor assemblies and project-specific packs
InspectionMaterial grade, dimensions, thread fit, sleeve geometry and surface condition

Stainless Steel Sleeve Anchor Applications

Installers use these anchors for brackets, frames, rails, supports, machinery and building-services fixtures. For example, suitable sizes serve concrete, solid masonry, industrial plants and maintenance projects.

Typical Use Areas

01 Engineering & Machinery
02 Construction & Fabrication
03 Industrial Equipment
04 Structural Applications
05 Automotive Applications
06 General Manufacturing
07 Process Equipment
08 Maintenance & Repair

Stainless Steel Sleeve Anchor Manufacturing Process

Generally, the production route depends on the stainless steel grade, diameter, length, head style and sleeve geometry. In practice, manufacturing includes material preparation, forming or machining, threading, sleeve production, passivation and inspection. In addition, teams control each stage against the drawing or purchase requirement.

Typical Production Stages

MATERIAL 01

Raw Material Verification

First, the production team verifies the specified stainless steel grade, section dimensions and incoming material condition.

FORMING 02

Forming & Machining

Next, controlled forming or machining creates the threaded stud, head, expansion cone and required body details.

LOCKING 03

Threading & Passivation

Afterward, the sleeve is formed and assembled with the stud, cone, nut or screw. Moreover, components are cleaned and passivated where specified.

QUALITY 04

Inspection

Finally, inspection verifies assembly dimensions, thread fit, sleeve geometry, material grade, surface condition and documentation.

Quality & Inspection

Inspection Areas

Inspection Focus

Consistent Product Requirements

Dimensional Verification
Thread Inspection
Raw Material Verification
Visual Inspection
Surface Finish Checking
Specification Review

Related Bundling Products

Stainless Steel Sleeve Anchor FAQs

What is a stainless steel sleeve anchor?

A stainless steel sleeve anchor is a through-fixing expansion fastener with a sleeve around the anchor body. As a result, tightening the nut or screw expands the sleeve and secures the fixture to the base material.

Which stainless steel sleeve anchor styles are available?

Common options include hex nut, hex bolt, countersunk, hook and custom-head designs in different stainless steel grades. However, availability depends on the diameter, length, head style and project requirements.

Can stainless steel sleeve anchors be customized?

Buyers can discuss custom diameters, lengths, head styles, sleeve profiles, grades and packaging according to the specification. Moreover, final requirements should be confirmed before production.

Where are stainless steel sleeve anchors used?

Installers commonly use these products for brackets, frames, rails, supports, machinery and building-service fixtures. For example, the selected size should match the base material and fixture thickness.

How do I select the right stainless steel sleeve anchor?

Selection should consider steel grade, diameter, length, head style, base material, fixture thickness, load and edge distance. Therefore, buyers should review structural calculations and installation instructions before ordering.

Looking for Stainless Steel Sleeve Anchors?

Finally, share the required steel grade, diameter, length, head style, quantity and project specification with our team.

Send Your Requirement

Contact Us

ADDRESS
Ground Floor 12-B,
91/101 Khemraj Bhavan,
7th Khetwadi Lane,
Mumbai – 400004

Mstar Enterprises

Trusted Partner For Industrial Solutions & Engineering Supplies